WelcomeUser Guide
ToSPrivacyCanary
DonateBugsLicense

©2025 Poal.co

572

This just happened a couple of hours ago. Was reading some comments and went to go to the main page and it was gone. Works on 4g, but not my Home Network unless I'm using a VPN or Tor.

This is gay.

This just happened a couple of hours ago. Was reading some comments and went to go to the main page and it was gone. Works on 4g, but not my Home Network unless I'm using a VPN or Tor. This is gay.

(post is archived)

[–] 0 pt

Try to ping poal.co with your ISP and compare the result with the VPN on.

[–] 0 pt

Trace Route and a Ping without VPN and they both go through just fine. What gives?

traceroute to poal.co (23.184.48.169), 30 hops max Hop 1: From 192.168.1.1, 14 ms

Hop 2: From 10.177.116.1, 23 ms

Hop 3: From int-0-5-0-16.dtr01rcfrmi.netops.charter.com (96.34.37.42), 23 ms

Hop 4: From lag-15.crr01aldlmi.netops.charter.com (96.34.36.38), 24 ms

Hop 5: From lag-807.bbr01aldlmi.netops.charter.com (96.34.2.8), 23 ms

Hop 6: From lag-805.bbr01chcgil.netops.charter.com (96.34.0.139), 27 ms

Hop 7: From lag-801.prr01chcgil.netops.charter.com (96.34.3.9), 27 ms

Hop 8: From 4.68.127.133, 38 ms

Hop 9: From ae2.2.edge4.Vienna1.level3.net (4.69.167.78), 140 ms

Hop 10: From 212.73.202.130, 140 ms

Hop 11: From 81.95.2.138, 142 ms

Hop 12: From 5.56.21.190, 183 ms

Hop 13: From 109.236.95.166, 183 ms

Hop 14: From 109.236.95.231, 186 ms

Hop 15: *

Hop 16: From 23.184.48.169, 194 ms

Traceroute complete: 16 hops, time: 14308 ms


Ping Type: ICMP Packet Size: default TTL: default Timeout: 3000 Count: 3 Interval: 1000 General Timeout: not used

PING poal.co (23.184.48.169) 64 bytes from 23.184.48.169 (23.184.48.169): icmp_seq=1 ttl=48 time=534.0 ms 64 bytes from 23.184.48.169 (23.184.48.169): icmp_seq=2 ttl=48 time=489.0 ms 64 bytes from 23.184.48.169 (23.184.48.169): icmp_seq=3 ttl=48 time=195.0 ms

--- ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 4254ms rtt min/avg/max/mdev = 195/406/534/184.1 ms

[–] 0 pt

What error do you get when trying to open Poal in your browser?

[–] 1 pt

Connection refused