Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2025 Poal.co

477

So i have a couple 5.56 ars that wont cycle with my suppressor on, so for the time being my can lives on my .223 bolt gun. One of my ars i put an adjustable gas block on, but that hasnt solved the suppressed cycling issue. Im assuming a different buffer and/ or buffer spring is in order? Thoughts?

I just ordered a springfield saint victor ar10 in .308 and would like to get a can for that too, but im hesitant due to the poor results of running my 223 can on my ars. Some suggestions and insight from folks who have actually been there and done that would be much appreciated.

Thanks, faggots.

Okay, editing this comment because it pertains to several responses. Just took the gun out. Its been quite a while. Looked at the gas block and the adjustment scrrw is backed way out, open wide. First round, ejected to about 1:00. Then. Boomboomboom. Cycled flawlessly. Im at a loss here. Last i recall it was having issues. Going to go dump a some more rounds and see what happens

So i have a couple 5.56 ars that wont cycle with my suppressor on, so for the time being my can lives on my .223 bolt gun. One of my ars i put an adjustable gas block on, but that hasnt solved the suppressed cycling issue. Im assuming a different buffer and/ or buffer spring is in order? Thoughts? I just ordered a springfield saint victor ar10 in .308 and would like to get a can for that too, but im hesitant due to the poor results of running my 223 can on my ars. Some suggestions and insight from folks who have actually been there and done that would be much appreciated. Thanks, faggots. Okay, editing this comment because it pertains to several responses. Just took the gun out. Its been quite a while. Looked at the gas block and the adjustment scrrw is backed way out, open wide. First round, ejected to about 1:00. Then. Boomboomboom. Cycled flawlessly. Im at a loss here. Last i recall it was having issues. Going to go dump a some more rounds and see what happens

(post is archived)

You are currently inside a comment thread.
Click here to see all the comments (24).
[–] • 0 pt (edited )

Clamping off the gas to kick out a grenade isnt quite the same as tuning for a supressor.

No, but it does show that the quick and dirty 2 channel switch can be done.

I found some gasblocks with Suppressed/Unsuppressed settings(but not a very quick or easy switch), but they were all "hard coded" based on barrel length. Nothing that allowed 2 channels with adjustability.

Im unaware of an adjustable block with set screws like you mention.

Maybe that's for a reason. Maybe it'd be unnecessary design overkill and over-engineering, and if it were me, I'd just build another AR to not be suppressed...

How's your machining, fren? We could probably sell them for $100-$200 each. And suppressors are really starting to hit the normie sphere.