Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2026 Poal.co

(post is archived)

You are currently inside a comment thread.
Click here to see all the comments (24).
[–] • 1 pt

Nicely printed too! Hoping that it wasn't in PLA though.

[–] • 1 pt

Its usually recommended that you print glock frames at least on PLA+, as it was designed with that in mind.

But I've seen people print with a ton of other types of materials, like nylon, tritan, and even resin from resin printers.

When the printing time is not a concern, and cost is even less of, printing a lower just for it to crack or break is not really a problem. It will never explode or badly hurt the user, so a little experimentation is OK.

[–] • 1 pt

PLA is a low quality material which I believe should only be used for toys. Carbon or glass fiber nylon is what should be used if possible.

Not familiar with Tritan.

[–] • 0 pt

PLA+ is PLA mixed with other materials and has more strength and resistance to temperature than normal PLA.

Don't disregard PLA+ so easily, because even though there are better materials, it is still quite capable.

For instance, the FGC-9 is designed with PLA+ in mind and works great.