Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2025 Poal.co

799

Soldered a new pigtail connector on the harness, and it's blowing ice cold. One little $9 fuck boy wire was keeping the system from working. Now my wiper arms stopped working so once the new push rods get here I'll fix that too. The OG arms lasted 20 years, and it's a $32 fix, so they don't owe me anything.

Soldered a new pigtail connector on the harness, and it's blowing ice cold. One little $9 fuck boy wire was keeping the system from working. Now my wiper arms stopped working so once the new push rods get here I'll fix that too. The OG arms lasted 20 years, and it's a $32 fix, so they don't owe me anything.

(post is archived)

You are currently inside a comment thread.
Click here to see all the comments (17).
[–] • 1 pt

I used pag 46/sp10 oil which is what the manufacturer specifies. I used one oz less than the system needs, then I used an oil additive as the last oz. This further cools the air, and acts as a seal swell agent. Yes I replaced all O-rings and I have rubber caps on all the hard lines I disconnected. I'm not an amateur.