Gonna use some SWAG here:
You ran power from a common higher voltage source (Ignition switch maybe) and used diodes and resistors to meter the charge down to the correct reference voltage (maybe 5 volts) and fed it to the "black box" sensor port?
Edit:
Gonna use some SWAG here:
You ran power from a common higher voltage source (Ignition switch maybe) and used diodes and resistors to meter the charge down to the correct reference voltage (maybe 5 volts) and fed it to the "black box" sensor port?
Edit: @NoisySilence
See how easy that was. Correct voltage is the trick,very picky layout to dial into. Plug into the port and it sees something,try to run software your SOL cause the box is gone
See how easy that was.
Correct voltage is the trick,very picky layout to dial into.
Plug into the port and it sees something,try to run software your SOL cause the box is gone
Nice! You must have some very detailed wiring diagrams.
Nice! You must have some very detailed wiring diagrams.
Beer and Military
Beer and Military
(post is archived)