I posted my modded (modified) untraceable ghost spoon technology to another sub. This post is to show what I used to create the untraceable ghost spoon. I created this modded (modified) untraceable (silenced) ghost spoon technology from standard spoon I saw online (obviously it's just a spoon with some strange attachment to make it look like it has a silencer on it). I created my untraceable ghost spoon using CAD(D) or Computer Aid Draft & Design software. Some of these are free online while others you have to pay for. I'd recommend to do some research first if you are interested in CAD(D) type software before paying for anything and/or even just downloading anything online. Free software can be very hit or miss (obviously). I then 3D printed it out using a 3D printer. You can buy these online, but some can be quite expensive. You can get a cheaper one for $100 / $200, but 3D printers with the ability to print overhangs may cost $400-$500 themselves. You'd be limited to the designs you can print with a 3D printer with a cheaper 3D printer (obviously for the most part). As you can see from the pics below there are overhangs in the front (spoon silencer part) and on the center of the spoon to as well. The middle cutout part extends out with the middle ring slightly overhanging the center cutout. Basically I have overhangs with the cutout of the center part of the spoon and not all 3D printers can do this. https://pic8.co/sh/dFzUaP.JPG https://pic8.co/sh/2fR6c3.JPG https://pic8.co/sh/CXOfCz.JPG I can't reveal who I am in this post (obviously). This is an older pic that I had and I had used for something else then modified it to use here on Poal. https://pic8.co/sh/WtYhMt.png ----- Here is the other post I used it in. https://poal.co/s/ForksSuperiorCutlery/68645