Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2024 Poal.co

1.0K

They're a small shop, this will be their first swiss machine. I'm doing a 500 piece capability run after holding a cpk of 2.92 on a +/- .001" feature on a 30 piece run. 17-4 stainless, the endmill cutting the flat lasted 300 pieces before it started pushing a burr, but 2 turning tools and the cutoff tool still going strong at 450 pieces. I've moved 2 offsets <.0005 and that's it.

They're a small shop, this will be their first swiss machine. I'm doing a 500 piece capability run after holding a cpk of 2.92 on a +/- .001" feature on a 30 piece run. 17-4 stainless, the endmill cutting the flat lasted 300 pieces before it started pushing a burr, but 2 turning tools and the cutoff tool still going strong at 450 pieces. I've moved 2 offsets <.0005 and that's it.

(post is archived)

You are currently inside a comment thread.
Click here to see all the comments (8).
[–] • 0 pt

What machine is it running on?

[–] [deleted] • 1 pt

A Nomura swiss. 25mm UB8-K2 specifically.

[–] • 1 pt

Always heard Nomura was a good machine, never had any experience with one

[–] [deleted] • 1 pt

They're great machines... I've been in manufacturing for 35 ish years, the past 10 years has been working for an Okuma distributor who also is the Nomura distributor for North America. 2 years ago they decided to make me an application engineer for the Swiss line. I've worked with Citizens and Stars for a few years, and now Nomuras. I'd pick Citizen and Nomura for ease of use, functionality, capability. But Nomuras are far and above a better price across the board. This year they're rolling out a 26mm series on a few models for the American market, making it possible to run 1" stock. I don't know if we'll have one for IMTS this year or not. Fingers crossed!