WelcomeUser Guide
ToSPrivacyCanary
DonateBugsLicense

©2026 Poal.co

1.0K

Once again, it's time for the FNGT!

If you don't know how this works, click this link (fngt.gq). That link will take you to another site to give you some additional information and tell you about some of our off-site features. That's also the site where we will host the weekly guitar threads, should Poal go down.

NOTE: That site is by invitation only. If you want an invite, and you're a regular participant, then just ask Crazy, or myself.

If you do know what's going on, you probably don't need to click that link - but you may want to, to make sure you know of the other features, such as the archive or a separate forum that's invite only.

Remember, we are guests here on Poal. Let's act like it. If you're interested in supporting Poal, then you can donate.

**Once again, it's time for the FNGT!** If you don't know how this works, [click this link](https://fngt.gq/index.php?page=intro). That link will take you to another site to give you some additional information and tell you about some of our off-site features. That's also the site where we will host the weekly guitar threads, should Poal go down. **NOTE:** That site is by invitation only. If you want an invite, and you're a regular participant, then just ask Crazy, or myself. If you do know what's going on, you probably don't need to click that link - but you may want to, to make sure you know of the other features, such as the archive or a separate forum that's invite only. Remember, we are guests here on Poal. Let's act like it. If you're interested in supporting Poal, then [you can donate](https://poal.co/donate).

(post is archived)

[–] 0 pt

I have taken the battery out and am considering stripping the wires from the usb charger and taping a wire to the plus and wire to the minus but I am afraid I will blow the damned thing up, hasn't stopped my from thinking about it

[–] 0 pt

So long as you're sure of two things...

One, you gotta get the right pins. Two, you need an output voltage from the jack itself of 3.7 to 5 V.

The second may change if it's a newer phone that uses USB-C and has fast charging. In that case, it can handle more than 5 V, but you won't break anything with 5 V output from the jack itself.

Basically, stay under 5 V and you should be set.

Otherwise, contact your cell phone company and see what they have stuffed in their 'used' drawer for cheap phones that are at least a little modern?

[–] 0 pt

I generally charge my phone with the usb ports on my laptop and I have no clue the voltage they put out

[–] 0 pt

3.5 to 5 V, normally. Is it USB 2.0 to 3.0? If so, it should adjust to the draw, so that'd be fine.

Well, should be.

You just need to nail the correct pins.