Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2024 Poal.co

792

I bought a code reader, because after I moved out here in the sticks it turns out I'm now more then a couple of miles from the nearest AutoZone or O'Reilly, where they usually do that for free.

So here's what happened. I plugged the scanner in, and it said there's a misfire in cylinder five. Easy fix right, probably. Have a look at the spark plug, and that'll tell ya plenty. I went to pull the wire off the plug, and the wire fell the fuck apart. So, maybe not the plug.

I bought a code reader, because after I moved out here in the sticks it turns out I'm now more then a couple of miles from the nearest AutoZone or O'Reilly, where they usually do that for free. So here's what happened. I plugged the scanner in, and it said there's a misfire in cylinder five. Easy fix right, probably. Have a look at the spark plug, and that'll tell ya plenty. I went to pull the wire off the plug, and the wire fell the fuck apart. So, maybe not the plug.

(post is archived)

You are currently inside a comment thread.
Click here to see all the comments (6).
[–] • 0 pt

I'm really at a loss here as to how I should proceed

[–] • 1 pt

Plugs and wires are a first step. Reset check engine light in scanner, run it and see if it’s fixed

[–] • 1 pt

Replace the plugs and wires? You probably don't have a cap and rotor on an '02, but replace that as well if you have it.

[–] • 0 pt

A greater idiot than yourself would replace the spark plug wires first.

[–] • 0 pt

Right, I kinda figured that much. Problem is part of the plug wire, the connecty bit is still on the plug, and it's really not wanting to disconnect. I mean, the wire itself fell apart before the connector gave.