Probably an international intellectual property security thing

Funiac or hass, what you looking for, there a lot if mayerial openly available? Honestly I think a lot of it stems that they dont want you finding out how to rig machines with homebrew items because they lose money.

I remember reading many years ago that (say) video card or sound card manufacturers didn't publish much info because their competitors might try to clone the capabilities.

Following is from https://www.phatcode.net/res/224/files/html/ch64/64-01.html

Years ago, I was working at Video Seven, a now-vanished video adapter manufacturer, helping to develop a VGA clone. The fellow who was designing Video Seven’s VGA chip, Tom Wilson, had worked around the clock for months to make his VGA run as fast as possible, and was confident he had pretty much maxed out its performance. As Tom was putting the finishing touches on his chip design, however, news came fourth-hand that a competitor, Paradise, had juiced up the performance of the clone they were developing by putting in a FIFO.

That was all he knew; there was no information about what sort of FIFO, or how much it helped, or anything else. Nonetheless, Tom, normally an affable, laid-back sort, took on the wide-awake, haunted look of a man with too much caffeine in him and no answers to show for it, as he tried to figure out, from hopelessly thin information, what Paradise had done. Finally, he concluded that Paradise must have put a write FIFO between the system bus and the VGA, so that when the CPU wrote to video memory, the write immediately went into the FIFO, allowing the CPU to keep on processing instead of stalling each time it wrote to display memory.

Tom couldn’t spare the gates or the time to do a full FIFO, but he could implement a one-deep FIFO, allowing the CPU to get one write ahead of the VGA. He wasn’t sure how well it would work, but it was all he could do, so he put it in and taped out the chip.

The one-deep FIFO turned out to work astonishingly well; for a time, Video Seven’s VGAs were the fastest around, a testament to Tom’s ingenuity and creativity under pressure. However, the truly remarkable part of this story is that Paradise’s FIFO design turned out to bear not the slightest resemblance to Tom’s, and didn’t work as well. Paradise had stuck a read FIFO between display memory and the video output stage of the VGA, allowing the video output to read ahead, so that when the CPU wanted to access display memory, pixels could come from the FIFO while the CPU was serviced immediately. That did indeed help performance—but not as much as Tom’s write FIFO.

Yes. Experienced that. Been trying to get the op manual for a Johnford 850 off the net. Only 1 source and it requires a cc number.

what do you mean programming manuals?

Don't you just write the script and run it based on the part?

Try calling your OEM or going on their websites. Membership may be required.

Gcode be gcode n shit