WelcomeUser Guide
ToSPrivacyCanary
DonateBugsLicense

©2026 Poal.co

1.0K

im guessing a portion of the sewer gases would need to directly drive a pump to have a flowrate and then the methane could be changed to a liquid hydrocarbon close in weight.

between doing this and melting pennies i would be rich.

this is the closest thing to free energy as it gets. even if i heated a home with it that would be a success. for a wood fire in the home, giving it a sewer gas intake would allow low methane not to extingish or lower reactor(stove) temp; the quality of combustion would remain good.

im guessing a portion of the sewer gases would need to directly drive a pump to have a flowrate and then the methane could be changed to a liquid hydrocarbon close in weight. between doing this and melting pennies i would be rich. this is the closest thing to free energy as it gets. even if i heated a home with it that would be a success. for a wood fire in the home, giving it a sewer gas intake would allow low methane not to extingish or lower reactor(stove) temp; the quality of combustion would remain good.

(post is archived)

[–] 2 pts

Use your lips man...suck it good...

[–] 0 pt

"Hey guys, I want to frig up my plumbing to suck flammable methane into my home, there's no way this could go wrong"

-Famous last words

[–] 0 pt

"Dont worry.. I got this under control... I got advise from a NAZI reddit clone. "

And..

Mandatory : "the joo hates the self sustained energy producing sewer gas sucker"

[–] 0 pt

How can I use this method to make jenkem?

you'd have to liquify it using a cold condensor- and it would have to be very cold to liquify methane and other hydrocarbons (around -280f). probably a multi-stage condensation to remove unwanted impurities or perhaps a fractional distillation, since it would contain hydrogen sulfide and other nasty stuff you don't want.

overall not sure how viable this idea is since you'd have to process a large volume of sewer vapor to get any usable quantity of gas.

i would just feed it into a furnace then. that way the energy is taken from the sewer gas and the hazardous chemicals can be incinerated with the help of a common catyalitic converter found on many home wood stoves.

methane is like hydrogen a little bit and maybe a adsorbson tank of magnesium hydride pellets could adsorb the methane while not haveing preference for the hydrogen sulfide and from a series of fill and purge thetanks can seperate the methane.

doped zeolites like activated carbon also might work but the production of such a zeolite would have to be in-house because a system would go through it so fast.

another idea is chemically enhanced sparging equipment but what chemicals to use idk

[–] 0 pt

Steam Reforming is how you get longer chain hydrocarbons from smaller

ahh ok.. i heard of thermal depolymerization the other day but was unsure the industrial means for the other direction.

when the fuck is elon musk giving me my money