Pic is blurry, but it looks like you fixed it
Pic is blurry, but it looks like you fixed it
nope, haven't fixed it yet. it is the copper thing that comes from the video connector on the right. Got to find some fresh exacto blades and cut it out and re-mask the area with green nail polish, let that dry and cure and then throw a bodge on it.
nope, haven't fixed it yet. it is the copper thing that comes from the video connector on the right. Got to find some fresh exacto blades and cut it out and re-mask the area with green nail polish, let that dry and cure and then throw a bodge on it.
You could just use some bell wire or something small and insulated.
You could just use some bell wire or something small and insulated.
That is the plan. got to clean up the loose soldermask (the green coating) on the board and seal it so humidity doesn't work it's way in and make more bubbles and cracks. I use kynar wire (jameco.com) for fixing traces. Good stuff.
That is the plan. got to clean up the loose soldermask (the green coating) on the board and seal it so humidity doesn't work it's way in and make more bubbles and cracks. I use [kynar wire](https://www.jameco.com/shop/keyword=kynar-wire) for fixing traces. Good stuff.
A 30 guage wire is a little thin imo, but if it's off the power side of thing it might be ok.
A 30 guage wire is a little thin imo, but if it's off the power side of thing it might be ok.
The trace is even less.
The trace is even less.
(post is archived)