Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2024 Poal.co

146

Archive: https://archive.today/vDvNj

From the post:

>[My Ham Radio Journey] wanted to see if a “common person” (in his words) could build an effective vertical ham radio antenna. If you look at the video below, the answer is apparently yes. He started with a 24-foot fishing rod and a roll of 22 gauge wire. The height of the antenna wire is just over 20 feet long and he has several ground radials, as you might expect for a vertical antenna. You also need a toroid to make an unun for the feed point. The details of how he mounted everything will be useful if you want to experiment with making your own version.

Archive: https://archive.today/vDvNj From the post: >>[My Ham Radio Journey] wanted to see if a “common person” (in his words) could build an effective vertical ham radio antenna. If you look at the video below, the answer is apparently yes. He started with a 24-foot fishing rod and a roll of 22 gauge wire. The height of the antenna wire is just over 20 feet long and he has several ground radials, as you might expect for a vertical antenna. You also need a toroid to make an unun for the feed point. The details of how he mounted everything will be useful if you want to experiment with making your own version.
You are currently inside a comment thread.
Click here to see all the comments (8).
[–] • 2 pts

Some types of antennas do need an "earth" ground to work, but this device goes between the antenna and your receiver. It only comes into play when the potential between the incoming line (your radio) and ground (the case) exceeds a certain value. Otherwise, it's just a connector.

[–] • 1 pt

Not too bad.. 0.2 dB loss, but only handles 200W.. That could be a problem for amp use..

[–] • 1 pt

There are others out there, that was simply the first I found.