Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2025 Poal.co

Two day print, so far so good. eSun PLA+ on Mingda Rock3 Pro

It's an adapter-adapter ;) for a measurement device at work. It's going to receive 40 pogo-pins and plenty of wires to make 20 four-wire measurement nodes, controlled by a relay matrix.

Update March 12: Some progress, also found a rat in the first layers of the supports of a previously canceled print. https://pic8.co/a/12dbe4b1-64b8-482a-8f45-adfe0001e804

Update March 20 (The Final Solution): All wired up https://pic8.co/sh/b8DpBu.jpg

Finished, tied together, acrylic cover plate added. https://pic8.co/sh/5Ointt.jpg

Two day print, so far so good. eSun PLA+ on Mingda Rock3 Pro It's an adapter-adapter ;) for a measurement device at work. It's going to receive 40 pogo-pins and plenty of wires to make 20 four-wire measurement nodes, controlled by a relay matrix. Update March 12: Some progress, also found a rat in the first layers of the supports of a previously canceled print. https://pic8.co/a/12dbe4b1-64b8-482a-8f45-adfe0001e804 Update March 20 (The Final Solution): All wired up https://pic8.co/sh/b8DpBu.jpg Finished, tied together, acrylic cover plate added. https://pic8.co/sh/5Ointt.jpg

(post is archived)

You are currently inside a comment thread.
Click here to see all the comments (14).
[–] • 1 pt

Hi fren. As promised, updated the OP with some progress.