Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2025 Poal.co

Hopefully the final iteration of this: https://poal.co/s/3dprinting/741910 I gave up on the print-in-place experiment in favor of having something that works and is robust.

Now to print off a dozen and test with the first batch of CTs.

The little disc is a "spring" printed from TPU 70A (Recreus Filaflex). It goes under the coil for some give. Dimensions in mm: 24 wide 26 deep 16 high.

Hopefully the final iteration of this: https://poal.co/s/3dprinting/741910 I gave up on the print-in-place experiment in favor of having something that works and is robust. Now to print off a dozen and test with the first batch of CTs. The little disc is a "spring" printed from TPU 70A (Recreus Filaflex). It goes under the coil for some give. Dimensions in mm: 24 wide 26 deep 16 high.

(post is archived)

You are currently inside a comment thread.
Click here to see all the comments (8).
[–] • 2 pts

Seems a bit much just for shipping material. I assume there was some big problem that made a clever solution necessary.

[–] • 2 pts

The transfer happens right away. It's just a bitch to work with this thin wire and have everything flapping around in the breeze. No bueno for accuracy and repeatability and the final housing doesn't lend itself to accomplish any of the previous steps.

We're probably going to need at most a couple dozen of these, they're reused right away after the transfer is done.