Welcome • User Guide
ToS • Privacy • Canary
Donate • Bugs • License

©2025 Poal.co

1.3K

Back to making cool stuff!

So a word of advice, especially for @kikelMcJew who is getting a P1S soon. Keep your hands OUT of the machine while it is working. There is a pause button, USE IT. It's awful tempting to reach in there real quick to remove that wayward strand or something. Don't do it.

That was a bit expensive to fix. But my real problem that kept me from printing was a bad wire going to the ceramic heater on the hotend, the print head. I am not sure why it wouldn't work, the wire looked fine except the insulation was messed up. I taped it real nice and put it back in service but it just would not work. Maybe @stupidbird can tell me why?

Back to making cool stuff! So a word of advice, especially for @kikelMcJew who is getting a P1S soon. Keep your hands OUT of the machine while it is working. There is a pause button, USE IT. It's awful tempting to reach in there real quick to remove that wayward strand or something. Don't do it. That was a bit expensive to fix. But my real problem that kept me from printing was a bad wire going to the ceramic heater on the hotend, the print head. I am not sure why it wouldn't work, the wire looked fine except the insulation was messed up. I taped it real nice and put it back in service but it just would not work. Maybe @stupidbird can tell me why?
You are currently inside a comment thread.
Click here to see all the comments (4).
[–] • 0 pt

I did not think so when I inspected it. I thought that I had damaged it by not running it correctly. It looked like it was pinched and damaged the insulation. I took it apart, taped it up nice and rerouted it. I tried like 4 times but I could not get it to run. I got a new printhead and installed it and it's running like a champ.