WelcomeUser Guide
ToSPrivacyCanary
DonateBugsLicense

©2024 Poal.co

457

Normally I would post this to /s/automation but since its 3d printed and a novel use of sensors I figured it fit here more. Cool idea though.

Archive: (archive is down, will check back later)

From the post:

>Sometimes, it’s nice to know how windy it is outside. Knowing the direction of the wind can be a plus, too. To that end, [Sebastian Sokołowski] built himself an unusual anemometer—a wind gauge—to feed into his smart home system. [Sebastian’s] build is able to tell both wind speed and direction—and with no moving parts! Sort of, anyway. That makes the design altogether different from the usual cup type anemometers with wind vanes that you might be used to seeing on home weather stations. [Sebastian] wanted to go a different route—he wanted a sensor that wouldn’t be so subject to physical wear over time.

Normally I would post this to /s/automation but since its 3d printed and a novel use of sensors I figured it fit here more. Cool idea though. Archive: (archive is down, will check back later) From the post: >>Sometimes, it’s nice to know how windy it is outside. Knowing the direction of the wind can be a plus, too. To that end, [Sebastian Sokołowski] built himself an unusual anemometer—a wind gauge—to feed into his smart home system. [Sebastian’s] build is able to tell both wind speed and direction—and with no moving parts! Sort of, anyway. That makes the design altogether different from the usual cup type anemometers with wind vanes that you might be used to seeing on home weather stations. [Sebastian] wanted to go a different route—he wanted a sensor that wouldn’t be so subject to physical wear over time.