I set this up with a canbus 2 hat for the pi and an octopus pro along with these canbus tool boards.
Still waiting on some parts for the voron. Mainly an aluminum kit that replaces the 3d printed frame parts. Mine will be setup to have chamber heating to 120c and water cooling on the stepper motors and hotend so I can print in PEEK and PEI. Im using High temp epdm timing belts to deal with the high chamber temperatures.
Wow. Very nice. Please share your results when you can.
voron is about half built with the 3d printed parts. Started building it on an ASA kit then found the aluminum kit here. https://www.aliexpress.us/item/3256804592779401.html?spm=a2g0o.order_list.0.0.21ef1802QH6EuO&gatewayAdapt=glo2usa&_randl_shipto=US
Ive done all the software work of setting up the pi with the right drivers for the canbus 2 hat and loaded the klipper firmware on the octopus pro and toolboards and verified communication just wired up on my test bench. Hopefully the aluminum parts show up from china in the next couple weeks.
Here is the partially built voron https://files.catbox.moe/8vd37q.jpg
Hiwin rails all around and i reloaded the slides with ceramic ball bearings.
Didn't even know they had those kits now. Nice. If you don't mind, keep posting updates as you progress. Always fun to follow along.
(post is archived)